复杂声场环境下的近场声全息技术

近场声全息对测量环境的严格要求限制了它在工程实际中的应用,特别是利用互谱法求解全惠面声压时,参考信号的获取极为关键.针对有多个噪声源同时存在的复杂声场环境,提出一种工程解决方法,利用振动信号和声源出口处的信号作为近场声全息的参考信号,在传递函数法的基础上推导出全息面上分离的复声压,由此达到复杂声场环境下的近场声全息重建...     

外卡压力传感器的卡持结构设计与分析

针对外卡压力传感器存在的测试信号重复性差、信噪比低、安装局限性大的问题,设计了一种新型卡持结构——人字形结构,并从理论上分析了该结构相对于＂匚＂形夹块和环形夹块的优势。实验数据表明：采用人字形卡持结构的外卡压力传感器具有测试可靠、信噪比高、通用性好的特点。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

发动机缸内压缩压力非接触式检测方法研究

发动机汽缸压缩压力是检测发动机机密封性的重要参数.发动机密封性降低,会造成发动机经济性、动力性下降及废气排放指标恶化,因此对各缸压缩压力的检测具有重要意义.现提出一种利用曲轴瞬时转速,进行不解体检测坦克发动机汽缸压缩压力的方法.通过实车测量获得缸压及转速的特征参数,利用灰色理论模型的方法建立了发动机转速脉动与汽缸压缩压力的数学关系.试验结果表明,利用这种方法进行缸内压缩压力测量是可行的.     

船用三层组合外套液压联轴器最优分层分析

液压联轴器外套采用多层筒组合式外套可提高液压联轴器的弹性极限承载能力.文中对液压联轴器不同材料双层组合式外套和同种材料3层组合式外套进行了分析,确定了双层和3层外套分层界面的最佳半径.结果表明,3层外套的弹性极限承载能力比单层外套的弹性极限承载能力提高了31.4%;3层外套的弹性极限承载能力比双层外套的弹性极限承载能力提高了7.4%.     

基于物理声学法的目标双基地散射场计算

运用物理声学法预报水下目标双基地散射特性时,由于忽略了阴影面对散射场的影响,存在随着分置角的增大计算误差越来越大的缺点。针对这一问题,提出对目标表面散射积分区域进行修正的方案,从而将物理声学法的适用范围推广到任意分置角。对刚性球体和有限长柱体的散射特性计算结果表明:文中所提出的方法提高了目标大分置角声散射特性的计算精度,可以用于水下目标双基地散射场预报。     

航空燃料冰点快速测定方法

冰点是表征航空燃料低温使用性能的重要指标。常规冰点测定方法操作步骤复杂,测定时间长,影响航空燃料质量检测效率。基于光散射原理,将温度传感和光电检测技术应用于航空燃料冰点测定,利用燃料结晶对光散射和透射的影响,实现航空燃料冰点快速测定。该方法操作简单快速,检测1个油样用时少于15 min,大幅提高了冰点检测效率;试样体积仅需2 mL,有利于试验环境保护;测定结果重复性好,与标准方法 GB/T2430—2008具有良好的相关性。     

油料火灾爆炸模拟实验系统与测试技术

针对受限空间油料火灾爆炸发生、发展、控制、抑制实验的需要,研制了一系列模拟实验台架及关键参数测试系统。所研制的一系列模拟实验台架为各种工况的油料火灾爆炸模拟实验研究提供了完备的科研条件和支撑;研制的超动态数据采集与分析系统能对冲击波压力、瞬时温度、火焰识别、爆燃向爆轰演化(DDT)过程等进行连续捕捉、测试、分析;研制的基于紫外火焰探测、数字信号处理和网络化智能探测技术的油气爆炸火焰传播速度测试系统较传统的火焰传感器具有高灵敏度、零误报、探测距离远的特点。     

不同磁浮列车外形的气动性能比较

上海磁浮列车由于流线型车头较短,气动性能并不理想,根据国内厂家给定的列车横断面尺寸和对气动性能的要求,对国产磁浮列车气动外形进行多方案设计,通过求解三维可压N-S方程和k-ε双方程湍流模型,对提出的磁浮列车各种外形方案的气动性能进行数值模拟计算,并根据计算结果进一步改进气动外形,如此反复,直至得出气动性能和外观最优的磁浮列车外形。在最终选定的三种设计方案中,方案3由于水平投影轮廓线较窄、最大纵剖面轮廓线曲率较小,其整车空气阻力和列车交会压力波都较其它两种方案要小,因此为最佳的气动外形方案。通过比较分析,此次选用的国产磁浮列车外形,列车以430km/h运行时三节车总的空气阻力为33.84kN,而上海磁浮列车为54.07kN;国产磁浮列车最大列车交会压力波幅值为2913Pa,而在同等条件下上海磁浮列车为3827Pa,其气动性能明显优于上海磁浮列车。